2005-2009 Mustang Gauge Pod Installation Guide

This Mustang Parts Installation Guide Works For

CDC Triple Gauge Dash Pod (05-09 All)DOWNLOAD PDF

Tools Required

  • Dash Cleaner
  • Soft Clean Rag
Installation Time: 30 Mins

Installation

  1. Set Gauge Pod on dash for test fitting and placement location.

    NOTE:Do not engage the clips on the rear of the Gauge Pod to the defroster vents at this time.

    image 02


  2. Thoroughly clean the dash where the mounting tape will contact.

    NOTE:It is imperative that the dash is clean and free of any silicone based interior products. Test a small hidden area for color fade before applying any cleaner to the top of your dash pad.

  3. Install the gauges of your choice (2 1/16” Diameter - not included) into the Gauge Pod and wire/connect to the appropriate locations as directed by the installation instructions from the gauge manufacturer.

    image 03

  4. Place the Gauge Pod on the dash, verify fitment. Peel approximately 3” of the backing from the bonding tape on the sides and the front edge. Mount the Gauge Pod locking tabs into the defroster vent and place the Gauge Pod onto dash. Peel the backing from the tape areas and press above the taped edges to set bonding tape to the dash.

    image 04



Installation instructions provided by Classic Design Concepts.