How to Install a BBK Coyote 5.0L Swap Shorty X-Pipe on your 1979-1995 Mustang

This Mustang Parts Installation Guide Works For

BBK Coyote 5.0L Swap Off Road Shorty X-Pipe (79-95 All)DOWNLOAD PDF

Tools Required

Basic Hand Tools Required
Installation Time: 2 Hrs

Installation

  1. With vehicle raised in the air and supported on jackstands, pre-install the BBK Coyote Swap Headers and the supplied studs into the headers collectors.
  2. Lift X-pipe assembly into place and support with a jack. Connect the front flanges of the X-pipe to the header collectors. Slide X-pipe flanges over the header collector studs.
  3. Install the nuts and washers provided with the headers onto the collector studs.
  4. Connect the rear of the X-pipe to the stock flow tubes going to the mufflers.
  5. Position X-pipe for best fit and ground clearance and tighten all nuts and bolts.

How to Install a BBK Coyote 5.0L Swap Shorty X-Pipe on your 1979-1995 Mustang 01

Continue Shopping