Dual Beam Design. In the past if you wanted to convert to High Intensity Discharge technology you had to sacrifice your high beams. But not anymore! This HID Kit utilizes electromagnetic servo technology that is integrated right into the bulb holder to re-aim the headlight bulb up or down to switch between high and low beams.
HID 8000k Bulbs This HID conversion kit uses powerful 8000K bulbs that produce a pure white light with a very slight bluish tint to increase your mustangs night vision. The 8000k bulbs consume less power than standard halogen bulbs to produce lower heat and result in longer bulb life.
Straight Forward Installation. Each kit includes all the necessary hardware, ballasts, wiring, bulbs, and installation instructions needed to convert your blind pony to crystal clear HID. See below for complete installation instructions.
Application. This HID kit is designed for all 2005-2009 Mustangs with H13 bulbs, and the 2010-2012 Mustangs that came without the stock factory HID headlight option.
Specifications:
- Bulb Type: H13
- Ballast Input Voltage Range: 9~16VDC
- Ballast Input Voltage Norm: 13.5VDC
- Ballast Current Draw Max: 15A
- Ballast Current Draw Norm: 3.2A
- Ballast Power Output: 35W
- Ballast Maximum Starting Voltage Output: 23,000VDC
- Ballast Operating Temperature Range: -40~105°C
Installation Notes:
The dual HID H13 kit does not use a plug. The harnesses will have three wires: blue, white, and brown. These wires plug directly into the connectors.
- Blue Wire = High Beam
- White Wire = Low Beam
- Brown Wire = Ground
HID kits are not to be used in a Projector light setup.
Installation Instructions
|
HID Dual Beam Headlight Conversion Kit for 2005+ Mustang (H13 Bulb) - Installation Instructions! |
Mustang Fitment: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 Details >>
