Moroso Mustang Polished Aluminum Valve Covers (260, 289, 302, 351W) - Installation Instructions

This Mustang Parts Installation Guide Works For

Moroso Polished Valve Covers (260, 289, 302, 351W)DOWNLOAD PDF

Tools Required

Basic Hand Tools Required
Installation Time: 2 Hrs

Installation

Breather Hole Removal:

  1. Position the Valve Cover topside down on a surface that will not scratch or mar the finish of the Valve Cover.
  2. Make a center-punch mark in the Breather Hole you will be removing. (Some Moroso Valve Covers already have this mark). Use a hole saw to drill a 1-3/16" hole through the Valve Cover.
  3. Use a round file to increase the hole diameter to approximately 1.22" and to remove any flashing.

Installation instructions provided by Moroso.

Continue Shopping