How to install SHR GT Lower Grille Inserts on your 2005-2009 Mustang

This Mustang Parts Installation Guide Works For

SHR GT Lower Grille Inserts (05-09 GT)DOWNLOAD PDF

Tools Required

  • Multi-surface Cleaning Product
  • Paper Towels
  • ABS Compatible Plastic Glue (optional)
Installation Time: (approx) 15 Minutes

Installation

  1. Start with a clean car for best results. Remove any wax/sealants on the area where the inserts will be installed. The inserts are labeled Driver / Passenger on the back side of the pieces to aid in simplifying installation.
  2. Install the pieces with text up and to the backside (they will only fit correctly one way) until they snap into the existing lower grill. Slightly pull forward on the insert to insure that the retaining clips are securely engaged to the back of the existing lower grill. Repeat for other side.
  3. If desired for permanent added protection of cooling components, glue / cement compatible with ABS plastics may be used or the parts drilled / and riveted to the existing lower grill insert. Removal of the lower grill is recommended to reduce the risk of damage to bumper cover.
  4. If parts need to be removed for cleaning / maintenance and they have not been glued or riveted in place, they can be removed by pushing on the outer lower corner or the piece until it pushes through the grill – take care not to push into any coolers behind the grill, then rotate to the horizontal position and retract piece from the lower grill.

    image 01


    Finished Installation

Installation instructions provided by SilverHorse Racing.