How to Install a Grille Pillar Blackout on Your 2005-2009 GT or V6 Mustang

This Mustang Parts Installation Guide Works For

Grille Pillar Blackout - Matte Black (05-09 V6)DOWNLOAD PDF

Tools Required

  • Spray bottle with dish soap & water solution
  • Plastic squeegee (included)
  • Heat Gun or Hair Dryer
Installation Time: 30 Minutes

Installation

Note: Although V6 & GT blackouts have different part numbers, the following instructions apply for both.

Step 1:

Thoroughly spray the grille pillar with the soap and water solution.

Vinyl Grille Pillar Blackouts (05-09 Mustang) - 02

Step 2:

Peel the vinyl away from the adhesive backing and place it on the grille pillar as shown.

Vinyl Grille Pillar Blackouts (05-09 Mustang) - 03

Step 3:

Using the supplied plastic squeegee, push any air bubbles out towards the edges of the vinyl.

Vinyl Grille Pillar Blackouts (05-09 Mustang) - 04

Step 4:

Use a heat gun or hair dryer to slightly heat the vinyl and wrap it around the edges of the pillar as shown.

Vinyl Grille Pillar Blackouts (05-09 Mustang) - 05

Step 5:

Repeat for opposite side to complete the installation.