Mustang Parts › 2005-2009 Mustang Parts Installation Instructions › How to Install Tail Lights for 2005-2009 Mustang
Share

How to Install Tail Lights for 2005-2009 Mustang

This Mustang Parts Installation Guide Works For

Raxiom Smoked Coyote Tail Lights (05-09 All)Raxiom Smoked Coyote Tail Lights (05-09 All) 49117
Fitment Includes:
  • - V6 2005, 2006, 2007, 2008, 2009
  • - GT 2005, 2006, 2007, 2008, 2009
  • - GT500 2007, 2008, 2009
  • - Bullitt 2008, 2009
Raxiom Coyote Tail Lights (05-09 All) 49123Raxiom Smoked Tail Lights (05-09 All) 49066		DOWNLOAD PDF

Tools Required

  • Flat-Head Screwdriver
  • 11mm Socket or Wrench
Installation Time: 2 Hrs

Installation

  1. Use a flat-head screwdriver to remove the 4 clips holding the plastic trunk trim in place.

    Guide 49117 Picture 01

  2. Use an 11mm socket or wrench to remove the 3 nuts holding the tail light to the vehicle.

    Guide 49117 Picture 02

  3. Remove the tail light housing from the vehicle and remove the bulb sockets by twisting them. Make sure to take note of each bulbs location so you can install them in the same order in the new housing.

    Guide 49117 Picture 03

  4. Place the bulbs in the new housing. The location of the reverse light bulb will change slightly if you are installing the 2010 style tail lights (shown below).

    Guide 49117 Picture 04

  5. Repeat Step 2-4 for the other side of the vehicle. Once the lights have been tested and work properly, re-install them onto the vehicle and replace any trunk trim that was removed to complete the installation.