Steeda Cold Air Intake (10 GT)

Steeda Cold Air Intake (10 GT)
Click to Enlarge

About Steeda

Steeda Mustang Performance Products
For over 2 decades, Steeda Autosports has been the undisputed leader in Mustang performance. No other aftermarket manufacturer has won more races, set more track ...... READ MORE

YOU MIGHT ALSO LIKE:

OUR PRICE$399.99
Market Price $449.99You Save 11% ($50.00)
Item # 16227
Ships the same business day

Product Features

  • Increases Power and Throttle Response
  • Reusable High flow Air Filter
  • Simple Installation
  • Fits 2010 4.6L V8 GT Mustangs
  • Computer Tune Required - Why is a Tune Required?
More Power. By installing the Steeda 2010 Cold Air Intake on your GT along with a custom tune you can see typical gains of 20 to 25 horsepower and up to 25 ft/lbs of torque at the rear wheels.

Colder Air. Steeda designed this cold air intake system to tie into the stock factory lower cold air scoop for the coolest air charge possible. And they went the extra mile allowing their intake system to accept the stock factory sound tube to reduce under hood noise, if you choose to keep it.

Application. This Steeda Cold Air Intake System is specifically designed for use on the 2010 GT Mustang equipped with a 4.6L V8 engine.

Note: Requires the use of a SCT SF3/X3 PowerFlash or SCT LiveWire tuner to reprogram the cars computer for the Cold Air Intake.

Cold Air Intake Specifications
Year/Model: 2010 GT Filter Placement: Engine Bay
Material: Plastic Finish: Black
Manufacture: Steeda Computer Tune Required: Yes

Installation Time:

(approx) 1 Hour

Difficulty Level:

Simple installation for anyone.

What's in the box?

Hardware included:
  • (2) Two hex bolts
  • (4) Four bolts small
  • (4) Four bolts large - long
  • (4) Four bolts large - short
  • (2) Two bolts mini
  • (4) Four small washers
  • (4) Four large washers
  • (4) Four nuts
  • (4) Four clamps large
  • (3) Three clamps small
  • (1) One piece of hose
  • (1) One rubber hose connector
  • (1) One large rubber trim
  • (1) One small rubber trim
  • (2) Two brackets
  • (2) Two small threaded bolt spacers

What's in the box?

Hardware included:
  • (2) Two hex bolts
  • (4) Four bolts small
  • (4) Four bolts large - long
  • (4) Four bolts large - short
  • (2) Two bolts mini
  • (4) Four small washers
  • (4) Four large washers
  • (4) Four nuts
  • (4) Four clamps large
  • (3) Three clamps small
  • (1) One piece of hose
  • (1) One rubber hose connector
  • (1) One large rubber trim
  • (1) One small rubber trim
  • (2) Two brackets
  • (2) Two small threaded bolt spacers
checkmark
Fitment:
  • GT 10

Customer Reviews