Mustang Smoked Light Cover (99-04) - Installation Instructions

This Mustang Parts Installation Guide Works For

Smoked Headlight Covers (99-04 All)DOWNLOAD PDF

Tools Required

Installation Time: 30 Mins

Installation


Headlight Covers Install:
  1. Using the supplied alcohol prep pads, thoroughly clean surface of the light where adhesive from cover will mate with light.

    Mustang Smoked Light Cover 99-04 1

    Mustang Smoked Light Cover 99-04 2

  2. Peel backing film from adhesive on light cover.

    Mustang Smoked Light Cover 99-04 3

  3. Place front lower lip of light cover under head light.

    Mustang Smoked Light Cover 99-04 4

  4. Place outer lip of light cover under outer edge of headlight ensuring a tight fit.

    Mustang Smoked Light Cover 99-04 5

  5. Firmly press down on adhesive to fully seat the light cover.

    Mustang Smoked Light Cover 99-04 6


Tail Light Cover Install:
  1. Using the supplied alcohol prep pads, thoroughly clean surface of the light where adhesive from cover will mate with light.

    Mustang Smoked Light Cover 99-04 7

  2. Peel backing from adhesive on light cover.

    Mustang Smoked Light Cover 99-04 8

  3. Carefully align cover over light. Make sure the light is fully covered on outer corner.

    Mustang Smoked Light Cover 99-04 9

  4. Firmly press down on the adhesive to fully seat the cover.

    Mustang Smoked Light Cover 99-04 10

Installation instructions provided by Manufacturer.

Continue Shopping