2005-2010 Mustang Quarter Window Louvers - Painted - Installation Instructions

This Mustang Parts Installation Guide Works For

Quarter Window Louvers - Pre-painted (05-13 All)DOWNLOAD PDF

Tools Required

Basic Hand Tools Required
Installation Time: 60 Mins

Installation

  1. Using the supplied 3M Automotive Adhesion Promoter, thoroughly clean the surface of the louver where adhesive will be applied. Using the supplied Alcohol Prep Pads, thoroughly clean the surface of the vehicle where the louver will be applied.
    Caution:Do not use 3M Adhesion Promoter on vehicle’s painted surfaces.Quarter Window Louvers 0509 1
    Quarter Window Louvers 0509 2
    Quarter Window Louvers 0509 3
    Quarter Window Louvers 0509 4
  2. Apply the supplied adhesive tape to the outside edges of the louver, making sure that it is not extending past the edges.Quarter Window Louvers 0509 5
  3. Peel backing from adhesive tape on the louver.
  4. Quarter Window Louvers 0509 6
  5. Lightly place louver on vehicle in desired location, making sure the bottom edge is parallel to the body line as shown in picture.Quarter Window Louvers 0509 7
  6. Once louver is in desired location, firmly press down on all surfaces where adhesive was applied to ensure a proper fit.Quarter Window Louvers 0509 8
  7. Repeat all steps for remaining louver to complete installation.

Installation instructions provided by Stack Racing