Mustang Parts › How to Install MMD Smooth Aluminum Rear Window Louvers for a 2005-2012 Mustang
Share

How to Install MMD Smooth Aluminum Rear Window Louvers for a 2005-2012 Mustang

This Mustang Parts Installation Guide Works For

MMD Rear Window Louvers - Smooth Aluminum (05-13 All)MMD Rear Window Louvers - Smooth Aluminum (05-13 All)
Fitment Includes:
  • - V6 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
  • - GT 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
  • - GT500 2007, 2008, 2009, 2010, 2011, 2012, 2013
  • - Bullitt 2008, 2009
DOWNLOAD PDF

Tools Required

  • 7mm Socket & Ratchet
Installation Time: 1 Hr

Installation

  1. Use a quality automotive glass cleaner to thoroughly clean your rear window, paying special attention to the four corners where your new louvers' brackets will adhere.Guide 41203 Picture 1
  2. Wipe down the corners of your rear window with the supplied alcohol pads-this will ensure proper adhesion of the 3M adhesive on the brackets.Guide 41203 Picture 2
  3. Using a 7mm socket, loosen all four nuts holding the window louvers to the brackets. This will allow for adjustment when placing the louvers on your rear window. Remove the backing from the 3M adhesive and have someone help you carefully place the louvers on your rear window. Make sure the brackets line up in the top corners of the window as shown below.Guide 41203 Picture 3
  4. Once the louvers are in place, use the 7mm socket to tighten down the 4 nuts holding the louvers to the brackets. Make sure to press down on the brackets to fully seat the adhesive tape. This completes the installation of your rear window louvers.Guide 41203 Picture 4