How to Install a Throttle Body Spacer for 2005-2010 Mustang V6

This Mustang Parts Installation Guide Works For

SR Performance Throttle Body Spacer (05-10 V6)DOWNLOAD PDF

Tools Required

Basic Hand Tools Required
Installation Time: 60 Mins

Installation

Installation Instructions for 05-10 V6 Throttle Body Spacer

  1. Remove air intake to gain access to throttle body.
  2. Once you have access to throttle body remove four 8mm bolts securing it to the intake plenum.

    Guide 80305 Picture 01

  3. Pull throttle body away from the plenum and slide in the spacer and supplied gasket. Make sure the gasket goes on the throttle body side as shown.

    Guide 80305 Picture 02

  4. Re-install the throttle body to the plenum with the supplied bolts. Re-install you air intake to complete the installation.